Class 2 Solid State LED Drivers from Justin designed specifically
for architectural, signage and display applications.

  • Input dimmable – constant voltage output
  • Compact size yet high efficiency and performance in dry and damp environments – IP 67 rated
  • 12 or 24 Volt DC output
  • Multiple Inputs: 120/240-277
  • Class 1 conduit wiring compartment
  • All units are dimmable: ELV Dimmers-Reverse or Adaptive Phase Control, Trailing Edge
  • Visual LED indicator for inherent over current, short circuit and temperature protection
  • 5 year warranty. UL Listed Class 2, UL8750/CSA approved. (File 471431) (Link to UL Certification)
  • Made in the USA.
961_X2-X3-X4_open_800x500

Justin 96XSSD Single Circuit Justin 96XSSD Three Circuit
Justin 96XSSD Dual Circuit Justin 96XSSD Four Circuit

Specifications and Ordering Information

SSD - Solid State Dimmable LED Drivers, UL Listed, File E471431
MODELINPUT  OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 TOTAL







 VACHZAVDCVAVDCVAVDCVAVDCVAVA

361-12SSD120600.331236      36
362-12SSD240/277600.161236      36
361X2-12SSD120600.6612361236    72
362X2-12SSD240/277600.3312361236    72
361X3-12SSD120601.00123612361236  108
362X3-12SSD240/277600.50123612361236  108
361X4-12SSD120601.301236123612361236144
362X4-12SSD240/277600.661236123612361236144

481-24SSD120600.442448      48
482-24SSD240/277600.222448      48
481X2-24SSD120600.8824482448    96
482X2-24SSD240/277600.4424482448    96
481X3-24SSD120601.30244824482448  144
482X3-24SSD240/277600.66244824482448  144
481X4-24SSD120601.702448244824482448192
482X4-24SSD240/277600.882448244824482448192

601-12SSD120600.551260      60
602-12SSD240/277600.271260      60
601X2-12SSD120601.1012601260    120
602X2-12SSD240/277600.5512601260    120
601X3-12SSD120601.60126012601260  180
602X3-12SSD240/277600.82126012601260  180
601X4-12SSD120602.201260126012601260240
602X4-12SSD240/277601.101260126012601260240

961-24SSD120600.882496      96
962-24SSD240/277600.442496      96
961X2-24SSD120601.7024962496    192
962X2-24SSD240/277600.8824962496    192
961X3-24SSD120602.60249624962496  288
962X3-24SSD240/277601.30249624962496  288
961X4-24SSD120603.002484248424842484336
962X4-24SSD240/277601.542484248424842484336
Specifications: SSD - Solid State Dimmable LED Drivers, UL Listed, File E471431
The following applies to all models
INPUT
VOLTAGE AND FREQUENCY RANGE90~130VAC, 60Hz or 200~277VAC, 50/60Hz
AC CURRENTSingle circuit 96W – .88A @ 120VAC, .44A @ 240VAC
INRUSH CURRENT (Typ.)Less than 1A at 120 or 240V input
LEAKAGE CURRENT<1mA at 240VAC
PHASE CONTROLOutput voltage PWM duty cycle calculated by microprocessor using phase controlled AC input for output dimming. No (0-10V) control wire needed (ELV type phase control dimmer only)
OUTPUT
VOLTAGE ADJUST RANGE12V-10.8~13.2V or 24V-15.4~27.2 @ 50% load current
VOLTAGE TOLERANCE+/-3%
SETUP, RISE TIME250mS maximum @ 50% load current
EFFICIENCY (Typ.)80~85%
PROTECTION
CURRENT TOLERANCE+/-5% maximum
OVER CURRENTCONSTANT POWER <120% rated current down to 70% output voltage
SHORT CIRCUITOutput shut down, automatic restart
OVER VOLTAGEOutput voltage shall NOT exceed 150% of maximum rated voltage
OVER TEMPERATUREOutput limiting internal NTC over temperature protection circuit
ENVIRONMENT
WORKING TEMP.Nominal -20 to +50C ambient at full load, linearly derate to 60% of output rating up to 80C
WORKING HUMIDITY5% to 100%, non-condensing
INGRESS PROTECTIONDamp location, IP67, temporary immersion up to 1 meter
STORAGE TEMP., HUMIDITY-40 to 80C, 5% to 95% RH
TEMP COEFFICIENT0.1% per degree C maximum
VIBRATIONFrequency 5 to 50HZ acceleration ±7.35 M/(S*S), direction X,Y and Z Axis
SAFETY & EMC
SAFETY STANDARDSUL Listed, CSA Approved Class 2, Type TL/HL 85/70C (UL8750) Output Type CC Isolated
WITHSTAND VOLTAGEI/P-O/P:3.75KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
ISOLATION RESISTANCEI/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25C / 70% RH
EMI CONDUCTION & RADIATIONMeet FCC Part 15 Class B, CISPR22 Class B
HARMONIC CURRENTCompliance to EN61000-3-2 Class A ; EN61000-3-3
EMS IMMUNITYCompliance to EN61000-4-2,3,4,5,6,8,11.
OTHER
MTBF>100K hours, MIL-HDBK217E at 25C ambient.
NOTES
1. All parameters NOT specified otherwise are measured at 240VAC, 60HZ input, rated load and 25C ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted-pair wire terminated with 0.1uf & 47uf parallel capacitor.

Models and Specifications Subject to Change Without Notice